Freight Classification Result

LTL Shipment Analysis

Shipment Details

Item Description: Industrial Metal Shelving Units

Weight: 450 lbs

Dimensions: 72" x 36" x 24"

Density: Not provided

Handling Requirements: Standard handling, no special requirements

Density Calculation

Conversion to standard units:

Weight: 450 lbs
Dimensions: 72" × 36" × 24" = 6' × 3' × 2'
Volume: 6' × 3' × 2' = 36 cubic feet

Calculated Density: 450 lbs ÷ 36 cubic feet = 12.5 lbs/cubic foot

Freight Classification

Estimated Freight Class: 85

Based on the calculated density of 12.5 lbs/cubic foot, this shipment falls within the density range of 12-13.5 lbs/cubic foot, which corresponds to Class 85 (Medium density - crated machinery).

The item description of "Industrial Metal Shelving Units" is consistent with this classification, as metal shelving units are typically similar to crated machinery in terms of density and handling characteristics.

Additional Considerations

Handling Requirements Analysis:

Since no special handling requirements were specified, the classification is based solely on the density calculation. If the items require special handling such as temperature control, fragility concerns, or hazardous material considerations, the freight class might be adjusted accordingly.

Other Factors:

Stowability: Standard dimensions, no issues
Liability: No high-value item concerns noted
Handling: No special equipment required

Disclaimer: This freight classification is an estimate based on the provided information and general NMFC guidelines. Official freight classification should be confirmed with a licensed freight classification specialist or directly through the National Motor Freight Traffic Association (NMFTA). Actual shipping rates may vary based on carrier policies, negotiated rates, and other factors not considered in this analysis.

Freight Class Finder