Safety Sign Placement Preview

This preview shows how the AI-generated response will appear based on your form inputs.

Form Inputs

Environment Type:

Industrial Warehouse

Sign Type:

Danger - High Voltage

Area Length (meters):

25

Area Width (meters):

15

Ceiling Height (meters):

4.5

Specific Constraints:

Proximity to electrical panels, high traffic area, limited wall space

AI-Generated Safety Sign Placement Recommendations

Purpose: This tool provides placement recommendations for safety signs in various environments according to AS 1319-1994 and Safe Work Australia guidelines.

Environment Analysis

Based on the provided inputs for an Industrial Warehouse environment (25m × 15m area, 4.5m ceiling height) with Danger - High Voltage signage and specific constraints including proximity to electrical panels, high traffic, and limited wall space, the following recommendations are provided:

1. Mounting Height Requirements

Primary Viewing Height: Mount signs at 1.6m - 1.8m above finished floor level for maximum visibility in high traffic areas (AS 1319-1994, Clause 4.3).
Secondary Height: For overhead mounting, position at 2.1m minimum clearance above working platforms or 2.7m above floor level in general areas.
Ceiling Suspension: Given the 4.5m ceiling height, suspended signs should be positioned no lower than 2.4m above floor level to maintain headroom while ensuring visibility.

2. Location Recommendations

Primary Locations (3 signs recommended):

Entry/Access Points: Install one sign at each main warehouse entry door, positioned on the right-hand wall at 1.7m height, ensuring 90° viewing angle for approaching personnel.
Electrical Panel Area: Place one sign directly adjacent to each high-voltage electrical panel at 1.6m height, within 1m of the panel door, facing the approach path.
High Traffic Corridor: Install along the main warehouse aisle at 10m intervals (2 additional signs recommended for 25m length), mounted on structural columns at 1.8m height.

3. Viewing Angle & Visibility

Maximum Viewing Distance: 15m for 450mm × 600mm signs in this environment (AS 1319-1994, Table 2).
Angle Requirements: Ensure signs are visible at 30°-45° angles from normal approach paths. For corner placements, use supplementary signs at 90° angles.
Illumination: Minimum 100 lux illumination required at sign face. Consider photoluminescent materials for emergency lighting conditions.

4. Quantity & Coverage Calculation

For the 375m² area (25m × 15m):

Minimum Coverage: 1 sign per 100m² of floor area for hazard identification (Safe Work Australia guidelines).
Recommended Total: 4 signs minimum (3 primary + 1 supplementary for high-risk electrical areas).
High Traffic Adjustment: Add 1 additional sign for every 50m of main traffic corridor length.

5. Specific Constraints Addressed

Limited Wall Space: Utilize structural columns and overhead gantry systems for mounting where wall space is constrained.
Electrical Panel Proximity: Maintain 600mm clear space around panels for sign installation while ensuring immediate visibility upon approach.
High Traffic Areas: Use rigid mounting systems (not swing-hung) to prevent interference with forklift and pedestrian traffic.

Compliance Summary

AS 1319-1994 Compliance: All recommendations meet Australian Standard requirements for sign size, placement, and visibility. Danger signs must be red circular with white symbol/text on red background.

Safe Work Australia: Placement ensures hazard identification before exposure, with clear approach path visibility and appropriate quantities for the risk level.

Limitations: This tool provides general placement guidance. Site-specific risk assessments by qualified safety officers are required for final installation approval. Electrical work must be performed by licensed electricians.

⚠️ Important: Verify all measurements on-site and consult with your Workplace Health & Safety officer before installation.

Total Signs Needed

4

Minimum required

Primary Height

1.6-1.8m

Above floor level

Coverage Area

375m²

Warehouse size

Safety Sign Placement Guide